chain-link-system

CHAIN LINK FENCE

Move the mouse over the alphabets to see the details below
1. Chain Link Fabric

Description

Woven wire usually made from galvanized or PVC coated galvanized steel wire. The wires run vertically and are bent into a zig-zag pattern so that each “zig” hooks with the wire immediately on one side and each “zag” with the wire immediately on the other. This forms characteristic diamond pattern seen in this type of fence.

Typical Specifications
Wire Diameter:2mm (14-1/2GA by BWG or 14GA by USG) to 4.2mm (8GA by BWG or 8-1/2GA by USG).
Wire Tensile Strength:Wire Tensile is in the range of 35-55 Kgf
Zinc Coating:40Gms to 610Gms
We adhere to ASTM A392 – 11a : Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric &
ASTM F668 � 11 : Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric.
Mesh Size:25mm to 75mm
Height:900mm to 4000mm
Selvage:Knuckled or Twisted.

Fabric with 2-in. [50.8mm] or 2-1/8-in. [54.0-mm] mesh, in heights less than 72 in [1829 mm], shall be knuckled at both selvages. Fabric 72 in. [1829 mm] high and over shall be knuckled at one selvage and twisted at the other. These are standard selvages. Other selvage combinations will be supplied only if specified by the purchaser.

Usually selvages for fabrics less than 2-in. [50.8mm] shall be knuckled at both edges.

2. Line Wire
Line Wire is used to secure fence fabric. line-ties-wire-bg
3. Tie Wire
To secure fence fabric to line wire. line-ties-wire-bg
4. Stirrup Wire
chain-LinkE
5. Stretcher Bar

Description

Typically made out of 25x5mm thick MS flat bars weaved through end mesh and secured after stretching the fabric at strainer posts.

stretcherbar-bg
6. Intermediate/Line Post

Description

Mild steel tubes, Galvanized or powder coated, placed usually about Three(3) meters from each other to support the fence, in variety of diameters (usually around 42mm to 60mm) and wall thickness.

7. Straining Post

Description

Usually used either at ends of a chain link fence, or where the fence bends or at suitable distances (usually around 30 meters) when the fence is running in straight line for long distances.

Description

Mild steel tubes, Galvanized or powder coated, with variety of diameters (typically between 48mm and 89mm) and wall thickness.

end-straining-corner-post-bg
8. Corner Post

Description

Usually used either at ends of a chain link fence, or where the fence bends or at suitable distances (usually around 30 meters) when the fence is running in straight line for long distances.

Mild steel tubes, Galvanized or powder coated, with variety of diameters (typically between 48mm and 89mm) and wall thickness.

end-straining-corner-post-bg
9. End Post

Description

Usually used either at ends of a chain link fence, or where the fence bends or at suitable distances (usually around 30 meters) when the fence is running in straight line for long distances.

Mild steel tubes, Galvanized or powder coated, with variety of diameters (typically between 48mm and 89mm) and wall thickness.

end-straining-corner-post-bg
10. Horizontal Support

Description

Mild steel tube, galvanized or powder coated, fixed horizontally between Straining post and Intermediate post. The End/Corner/Straining posts are under stress from the stretch of chain link fence fabric. The horizontal support or brace helps spread the stress out over both the terminal post and the next intermediate post in line.

horizontal-support-bg
11. Truss Rod

Description

Installed at bottom of a terminal post (end/straining or corner post) to the two-third height of the adjacent intermediate post, pulls the horizontal support/brace towards the terminal post, in the process counteracts the pull from the stretch on the chain link fabric.

It is threaded at one end. Commonly used diameters are around 10mm. Length depends upon the distance between the straining post and the intermediate post.

trussrod-bg
12. Top Rail

Horizontal member of the framework running from terminal post to terminal post on top of the line posts.

13. Barbed Wire

contact detail

A-1 Fence Products Company Pvt. Ltd.
21, Raju Industrial Estate,
Penkar Pada Road,
Near Dahisar Check Naka, Mira,
Dist. Thane, Mumbai- 401 104.

Phone. 91-22-2897 7540/2897 7252.
Fax. 91-22-2848 5014
Mail. sales@a1fenceproducts.com

About us

A-1 fence products is a manufacturer of high quality steel fencing with core competency in customized fencing solutions.

Read More