THE RADIOBARRIER SYSTEM


The RADIOBARRIER system includes wireless intrusion detection technology consisting of seismic, microwave & passive IR sensors. The advanced artificial intelligence can detect & classify targets and communicate and cue the CCTV surveillance cameras for video output. It can be configured remotely and we can monitor and control the system using handheld or desktop receivers.

Features




Mesh Network

All RADIOBARRIER systems communicate wirelessly between each other creating communication nodes in a mesh.


Low Battery Consumption

The sensors and other components operate on various types of batteries and accumulators which makes sure that the devices give upto 5 years of mission life.


Reliability

RADIOBARRIER offers a very secure communication between the two way radio channels and the data can be transmitted to unlimited distance with a guaranteed delivery.


Ergonomic Design

The lightweight and user friendly design helps in an easy setup of the sensors and other components. The vast range of configurations & detection principles helps in making the system suitable for numerous application.


High Performance

The advanced intrusion detection technology is capable of providing a large detection range. The system can be installed on any terrain and in any weather condition owing to its industry standard and IP rating.


Integration

The RADIOBARRIER system operates on open standards (UHF 433) along with the set of software programs providing full control over the system. The system can be utilized as the first layer of defence in complete security systems via TCP/IP and GSM protocols or any command and control software at your site.

SENSORS

SEISMIC SENSORS


RS-U MULTI-SENSOR

RS-U detects human or vehicle intrusion by processing seismic data. It is powered by an external battery.

FEATURES:

Operating modes selective or simultaneous

  • Seismic Sensor
  • Break-wire sensor
  • Autonomous repeater
  • Network controller

RS-N DIRECTIONAL MULTISENSOR

The RS-N detects, locates and displays the movement of people or vehicles by processing seismic data. It is powered by an external battery.

FEATURES:

Operating modes selective or simultaneous

  • Directional Seismic Sensor



RS-U v2.0 MULTI-SENSOR

RS-U v2.0 is an concised version of RS-U Multi-Sensor designed for special functions. It is powered by an inbuilt rechargeable battery.

FEATURES:

Operating modes selective or simultaneous

  • Seismic Sensor
  • Break-wire sensor
  • Autonomous repeater
  • Network controller


MICROWAVE SENSORS


RS-L MICROWAVE SENSOR

The RS-L Sensor consists of a receiver (PRM and transmitter (PRD). It detects humans or vehicles by processing the variability in the electromagnetic field between PRM and PRD. It is powered by an external battery.

FEATURES:

Operating modes selective or simultaneous

  • Microwave Sensor
  • Break-wire sensor
  • Two versions available:
  • with the range up to 100m
  • and up to 200m

RS-L /433-EX MICROWAVE SENSOR

The RS-L / 433-Ex detects the intruders which are on foot by processing differences in the electromagnetic field. It consists of two units (receiver and / or transmitter) and is used for securing the enclosure of welded wire fencing. It is powered by an external battery.

FEATURES:

  • Explosion-proof housing
  • Underground installation
  • Set can be increased up to 3 sensors to cover a larger area.




INFRARED SENSORS


INFRARED SENSORS

RS-IK detects humans or vehicles by processing thermal data. Powered by an external battery.

FEATURES:

Operating modes selective or simultaneous

  • Passive infra-red sensor
  • Allows establishing a perimeter with a narrow detection zone

SENSOR SPECIFICATIONS


Sensor Communication Range Detection Range Operation Time Operating Temperature Range IP rating Weight Dimensions
RS-U Multisensor up to 15km Personnel - up to 100m Vehicle - up to 200m up to 5 years from -40°C to 50°C IP68 0.65kg 140x80x70mm
RS-U v2.0 Multisensor up to 15km Personnel - up to 100m Vehicle - up to 200m up to 5 years from -40°C to 50°C IP68 0.55kg 110x95x85mm
RS-N Directional Multisensor up to 15km Personnel - up to 100m Vehicle - up to 200m up to 5 years from -40°C to 50°C IP68 0.9kg 140x150x90mm
RS-IK Infra-Red Sensor up to 15km Personnel - up to 50m Vehicle - up to 100m Horizontal Angle - 5° Vertical Angle - 2.4° up to 3 years from -40°C to 50°C IP68 0.5kg 175x100x70mm
RS-L Microwave Sensor up to 15km up to 100m up to 200m (depends on the version) up to 3 years from -40°C to 50°C IP68 PRD - 0.7kg PRM - 0.8kg PRD - 185x140x50mm PRM - 200x140x50mm
RS-L/433-EX Microwave Sensor up to 15km Detection zone Max. length : 12m Height : 1.6m Width : 6m up to 3 years from -40°C to 50°C IP68 3.65kg 260x250x80mm

* depends on the antenna type installed

** depends on the battery type installed

CCTV SUBSYSTEM


RS-TV SENSOR

RS-TV offers independent video surveillance in any weather and at any time of the day. Installed with IR illumination for low light conditions. Video feeds are transmitted over the radio network and can be processed through a PTV receiver or through the RADIOBARRIER Operator's Console. Broadcast can be engaged manually or triggered by an RADIOBARRIER alarm sensor.

FEATURES:

  • Angle of view:
  • Horizontal: 20.0°
  • Vertical: 12.50°

RS-TP THERMAL IMAGING SENSOR

RS-TP captures a thermal photo in any weather and any time of day and transmits via radio network. The feed can be processed by a PTV portable receiver or by the RADIOBARRIER Operator's console. Broadcast can be done manually or triggered by an RADIOBARRIER alarm sensor.

FEATURES:

  • Black & white halftone image
  • Angle of view:
  • Horizontal: 20.0°
  • Vertical: 17.0°

PTV PORTABLE TV RECEIVER

PTV receives a video signal from RS-TV, RS-TP or a TV Repeater (TV-R). PTV is used to provide visual control over the monitored area and to adjust CCTV subsystem devices.





FEATURES:

  • Built-in battery
  • Black & white half-tone LCD


SENSOR SPECIFICATIONS


Sensor Communication Range Detection Range Operation Time Operating Temperature Range IP rating Weight Dimensions
RS-TV Sensor up to 20km up to 100m up to 6 months (ext. battery) from -40°C to 50°C IP67 2 kg 185x140x65mm
RS-TP Thermal Imaging Sensor up to 20km up to 200m up to 6 months (ext. battery) from -40°C to 50°C IP67 2 kg 250x90x75mm
PTV Portable TV Receiver up to 20km - up to 3 months (built-in battery) from -40°C to 50°C IP53 0.9kg 220x110x50mm

COMMAND & CONTROL


RADIOBARRIER OPERATOR’S CONSOLE WITH <> CONTROL SOFTWARE



OPERATOR’S CONSOLE is a desktop portable PC with the preinstalled <> command and control software, and networks, display alarm and service information on a digital map, receive video from the RADIOBARRIER CCTVv subsystem and perform the integration with other security systems.







SYSTEM REQUIREMENTS:

  • OS Windows XP SP3, Windows Vista, Windows 7, Windows 8, Windows 10
  • CPU speed of 1.6 GHz or higher;
  • 1 GB of RAM
  • DirectX 9 adapter;
  • 500 MB of hard drive space




KOPR CONTROL RECEIVER

KOPR is used to manage RADIOBARRIER system devices, namely:

  • Set up and configure sensors
  • Register sensor’s GPS coordinates during installation and locate when retrieving
  • Monitor status of the RADIOBARRIER detection devices .
  • Receive and display alarm and services messages
  • Control several networks
  • Determine GNSS coordinates

FEATURES:

  • Upto 3 days with an inbuilt rechargeable battery.
  • GPS/GNSS receiver
  • Upto 1 Km communication range
  • Operating temperature range from :
  • -10°C to +50°C
  • IP rating: IP53
  • Weight: 0.7 kg
  • Dimensions: 210x95x45 mm

SOFTWARE



GIS Radiobarrier is a command and control software for the RADIOBARRIER Wireless Intrusion Detection System. This special software solution is designed to provide complete status awareness in the monitored environment.

The software processes data from the installed sensors, displays its status, controls its operation and notifies alarm operators within the monitored area (with audible signals, messages, color and configuration of displayed icons, video image).


Highlights

  • complete situation awareness
  • high reliability
  • operation with unlimited number of networks
  • flexible integration with external security systems using WinSock protocol
  • clear graphical visualisation

System Requirements:

  • OS Windows XP SP3, Windows Vista, Windows 7, Windows 8;
  • CPU speed of 1.6 GHz or higher;
  • 1 GB of RAM;
  • DirectX 9 adapter;
  • 500 MB of hard drive space.